HOT Rear Window Broken Grid Lines Fix Tabs Useful Car De-Mist Repair Tools Kit.

Buy Now

Paint a new line

Repair a broken grid line by cleaning the area around the break with the alcohol prep. Allow to dry. Peel the wax paper liner off the stencil and apply the sticky side to the glass, aligning the stencil to the existing grid line. Brush on the conductive paint. As with the tab repair, let it dry for 24 hours before using the de-mist.

To repair the grid line on your defogger, simply attach the supplied stencil to the broken grid section and paint on the electrically conductive paint. Allow it to dry, then remove the stencil. You may want to touch up your work with a single-edge razor blade. But be careful. You don’t want to damage any other grid lines.

Repairs can be completed in less than 30 minutes. However, the instructions warned us to wait 24 hours to test the defogger. One last note: You can only do this repair when the temperature is above 50 degrees F.

Advantage & Features：

1.Used to repair scratched or broken rear window defogger grid lines

2.Make Permanent, Invisible repairs

3.Fix quickly and easily with a cheap cost

4.Glue is specially formulated to conduct electricity

5.Follow the instructions easily by step

Package included： 1x 2.0ml silver repair compound 3x Cottom  Swabs 1x Masking tap 1x Alcohol pre-pad 1x Plastic scraper 1x Clean cloth

Precautions : Avoid eye contact. Do not get on skin or clothing. Avoid breathing of vapors. Use only with adequate ventilation. Do not swallow. Wash thoroughly after handling. Close container after each use.